Product Description
Cold models accept various types of drill bits from 1/16″ to 1/2″. Hot drills (with heat element to secure synthetic lays and for giving loose fabrics a mark that will not close up) can use needle-type drill bits only.
NOTE: DRILL CAPACITY IS 1.5″ LESS THAN BIT LENGTH.
Cold Drills:
#CD3-6 uses 7.5″ bits.
#CD3-8 uses 9.5″ bits.
Hot Drills:
#CD3H-6 uses 6″ bits.
#CD3H-8 uses 8″ bits.
110 volt standard.
