Product Description
Finger-triggered Wolf drill for straight action. Cold models accept various types of drill bits from 1/16″ to 1/2″. Hot drills (with heat element to secure synthetic lays and for giving loose fabrics a mark that will not close up) can use needle-type drill bits only.
NOTE: DRILL CAPACITY IS 1.5″ LESS THAN BIT LENGTH.
Cold Drills:
#X-XV-6 uses 6″ bits.
#X-XV-8 uses 8″ bits.
#X-XV-10 uses 10″ bits.
Hot Drills:
#X-XH-6 uses 6″ bits.
#X-XH-8 uses 8″ bits.
#X-XH-10 uses 10″ bits.
8″ and 10″ models come standard with large base. Large base #X-LB can be ordered as an option for 6″ drills. 110 volt standard.
